Fix It Fast: Reader, Printer, Wi-Fi, Offline
When something stops in the middle of a sale, try these steps first. Most problems come down to power, paper, the connection or a sync. If the steps do not fix it, call Support, and chapter 6 tells you what to have ready.
- CH 1Start hereFive checks for any problem.
- CH 2ReaderA card will not go through.
- CH 3PrinterNo receipt comes out.
- CH 4–5ConnectionWi-Fi problems and working offline.
- CH 6CallWhen to stop and call Support.
Move between chapters with ← → or the buttons above. Tap Listen in any chapter to have it read to you.
Five checks for any problem
Do these in order. They take about two minutes and fix a lot.
- Read the screen. If there is an error message, take a photo of it.
- Check the power. Is the device charged, or plugged in and switched on?
- Check online or offline. The Home Screen shows which one the device is.
- Tap Sync Now. On a countertop it is on the Home Screen. On the handheld, tap the gear, then Sync Now.
- Restart. Switch the device off and on again, then try once more.
Still not working? Go to
| Problem | Chapter |
|---|---|
| Card reader | Chapter 2 |
| Printer | Chapter 3 |
| Wi-Fi | Chapter 4 |
| Offline | Chapter 5 |
The card reader will not take a card
First find out whether the problem is the card or the reader.
Any device
- Try another way. If tap fails, insert the chip. If the chip fails, swipe.
- Try another card. If a second card works, the first card is the problem.
- Check the connection. If the device is offline, go to chapters 4 and 5.
A countertop with a separate payment terminal
Home Screen › More › Register Settings- Check that the payment terminal has power and that its cable is pushed in at both ends.
- Open Register Settings and find the payment terminal panel.
- Check that your terminal is selected and that the connection type is right: Bluetooth or USB.
- Tap Save, then restart the register and the terminal.
Reader checklist
- Tried tap, chip and swipe
- Tried a second card
- Device is online
- Terminal has power and its cable is in
- Terminal is selected in Register Settings
Never do this
- Card numbersDo not write a card number down to run it later.
The printer will not print
Most printer problems are paper or power.
Paper and power
- Is there paper? Open the cover and check the roll.
- Is the roll the right way round? Receipt paper prints on one side only. If the paper comes out blank, turn the roll over.
- Is the cover shut? Press it until it clicks.
- Is it on? A separate printer needs to be plugged in and switched on. The handheld's printer is built in, so charge the handheld.
A countertop with a separate printer
Home Screen › More › Register Settings- Open Register Settings and find the receipt printer panel.
- Check that your printer is selected and that the connection type is right: Bluetooth, USB or TCP/IP.
- Tap Save, then restart the printer and the register.
Printer checklist
- Paper is loaded, the right way round
- Cover is clicked shut
- Printer is on, or the handheld is charged
- Printer is selected in Register Settings
- Device and printer restarted
Wi-Fi problems
Work out whether it is one device or the whole store.
One device is off the network
Swipe down twice › Wi-Fi- On the handheld, swipe down from the top of the screen, then swipe down again.
- Check that Wi-Fi is switched on and joined to your store network.
- If it is not, select your secure network and enter the password again.
- Move closer to the router and try again.
Nothing in the store has internet
- Unplug the router for 30 seconds, plug it back in and wait a few minutes.
- If it is still down, call your internet provider. Genius Support cannot fix your internet service.
Who fixes what
- The whole store is offlineYour internet provider
- Router or Wi-Fi passwordYour internet provider or IT person
- One Genius device will not connectGenius Support
When you are back online
- The Home Screen shows online
- Tap Sync Now
- Clear Quarantine (chapter 5)
When the device is offline
If an order cannot be processed at payment, for example when the connection drops, Genius stores it on the device in Quarantine until you upload it.
Find Quarantine
- Handheld: open History, tap the name in the ribbon and choose Quarantine.
- Countertop: tap Orders, then the Completed tab, then Quarantine.
- A red outline and a flag on the Quarantine button mean orders are waiting.
When you are back online
- Tap Retry All to upload every order.
- Wait until each order changes to Completed and gets a new transaction number.
- Tap Done.
- Uploads fail while you are still offline. Fix the connection first (chapter 4).
- An order shows a Fail button? It cannot be fixed from the register. Call Support before you tap it.
While you are offline
- Do not close the batch yet
- Do not clear the app or reset the device
- Auto Batch will not run without internet
- Fix the connection, then Retry All
Still stuck? Call Support
If the steps above did not fix it, stop and call. Do not keep restarting.
- Genius tech support: 866-646-7648. Monday to Friday 8 am to 9 pm Eastern, Saturday and Sunday 8 am to 7 pm Eastern.
- If you got Genius through Worldpay: 855-584-7550, open 24 hours a day, 7 days a week.
Have this ready
- Your name and the user you log in with.
- Your location name and account ID, the register name and the app version. They are all on the Home Screen.
- Whether the device shows online or offline.
- The photo of the error, and what you already tried.
Fix it fast, at a glance
Four problems and the first thing to try for each.